-
Sprayer kit for Nibbi PE17 flange racing carburetor
- €11,95
- €11,95
- Unit price
- per
Sprayer kit suitable for the Nibbi PE17 Flange Racing carburetor. This set contains three main jets and three idle jets for adjusting the fuel setting. Contents of the kit: Main jets: 88 – 90 – 92 Idle jets: 30 – 32 – 35 Applicable...- €11,95
- €11,95
- Unit price
- per
-
Sprayer kit suitable for the Nibbi PE24 Flange racing carburetor
- €11,95
- €11,95
- Unit price
- per
Sprayer kit suitable for the Nibbi PE24 Flange racing carburetor Adjustment kit with main jets and idle jets, suitable for the Nibbi PE24 Flange Racing carburetor. Ideal for precise tuning of the fuel mixture under different riding conditions. Contents of the kit: Main jets: 110...- €11,95
- €11,95
- Unit price
- per
-
Sprayer kit suitable for the Nibbi PE26 Flange racing carburetor
- €11,95
- €11,95
- Unit price
- per
Sprayer kit suitable for the Nibbi PE26 Flange racing carburetor Adjustment kit with main jets and slow jets, suitable for the Nibbi PE26 Flange racing carburetor. Ideal for precise adjustment of the fuel mixture under different driving conditions. Contents of the kit: Main jet:...- €11,95
- €11,95
- Unit price
- per
-
Sprayer kit suitable for the Nibbi PE28 Flange racing carburetor
- €11,95
- €11,95
- Unit price
- per
Sprayer kit suitable for the Nibbi PE28 Flange racing carburetor Adjustment kit with main jets and slow jets, suitable for the Nibbi PE28 Nibbi carburetor. Ideal for precise adjustment of the fuel mixture under different driving conditions. Contents of the kit: Main jet: 110...- €11,95
- €11,95
- Unit price
- per
-
Sprayer kit for the Nibbi PE22 Flange Racing carburetor
- €11,95
- €11,95
- Unit price
- per
Sprayer kit for the Nibbi PE22 Flange Racing carburetor Complete sprayer kit for the Nibbi PE22 Flange Racing carburetor, ideal for fine-tuning your settings for better performance. Contents of the kit: Main jets: 95 – 98 – 100 Idle jets: 30 – 32 – 35...- €11,95
- €11,95
- Unit price
- per
-
Manifold insulation and gaskets for 16mm carburetor
- €3,90
- €3,90
- Unit price
- per
Manifold insulator + gaskets – 16 mm Insulator and gasket set for mounting a 16 mm carburetor on the intake manifold. Contents of the set: 1x rubber insulator 1x paper gasket 1x O-ring Ensures a good seal and helps limit heat transfer from the...- €3,90
- €3,90
- Unit price
- per
-
Manifold insulation and gaskets for 20mm carburetor
- €3,95
- €3,95
- Unit price
- per
Manifold insulator + gaskets – 20 mm Insulator and gasket set for mounting a 20 mm carburetor on the intake manifold. Contents of the set: 1x rubber insulator 1x paper gasket 1x O-ring Equipped with a suitable seal between carburetor and manifold. Applicable to,...- €3,95
- €3,95
- Unit price
- per
-
Manifold insulation and gaskets for 22mm carburetor
- €3,95
- €3,95
- Unit price
- per
Manifold insulator + gaskets – 22 mm Insulator and gasket set suitable for mounting a 22 mm carburetor on the manifold. Contents of the set: 1x rubber insulator 1x paper gasket 1x O-ring Provides a reliable seal and helps limit heat conduction between the...- €3,95
- €3,95
- Unit price
- per
-
Manifold insulation and gaskets for 26mm carburetor
- €3,90
- €3,90
- Unit price
- per
Manifold insulator + gaskets – 26 mm Insulator and gasket set for mounting a 26 mm carburetor on the intake manifold. Contents of the set: 1x rubber insulator 1x paper gasket 1x O-ring Ensures proper sealing and reduces heat transfer between the manifold and...- €3,90
- €3,90
- Unit price
- per
-
Stainless steel exhaust underlying Dax and Monkey
- €129,00
- €129,00
- Unit price
- per
Stainless Steel Exhaust – Chrome Color This high-quality stainless steel exhaust is suitable for Honda Dax, Monkey, PBR, and similar models. The underlying design ensures a sleek look and a good fit. Material: Stainless steel Color: Chrome Includes DB-killer Brand: Mad Munk Also available...- €129,00
- €129,00
- Unit price
- per
-
Standard swingarm for all Dax models black
- From €54,50
- From €54,50
- Unit price
- per
Standard Swingarm for Honda Dax (Original & Replica) This swingarm is a standard replacement part for all Honda Dax models, both original and replicas. Choice of only the swingarm or including brake rod and chain adjusters ✔ Suitable for: Honda Dax ST50, ST70 and...- From €54,50
- From €54,50
- Unit price
- per
-
Standard rear brake rod for Dax models - with adjusting screw and barrel
- €7,99
- €7,99
- Unit price
- per
Rear brake rod for Dax models Suitable for Dax models with a standard swingarm. Total length: 39 cm Comes with adjustment screw and barrel A complete brake rod for easy installation.- €7,99
- €7,99
- Unit price
- per
-
Stator + flywheel Skyteam and Lifan with electric start
- €39,00
- €39,00
- Unit price
- per
Stator + flywheel Complete ignition plate + flywheel Suitable for 50cc / 125cc engine blocks of Skyteam / Lifan with an electric starter Green line Red: Neutral lightWhite line Red: Pickup ignitionBlack line red: low voltage ignitionWhite: Ground/chassisYellow line Red: LightingYellow: battery charging- €39,00
- €39,00
- Unit price
- per
-
Stator / base plate for 12 volt engine blocks 110/125/140cc
- €24,90
- €24,90
- Unit price
- per
Complete Base Plate with Coils and Pickup – 12VUniversal stator plate suitable for 12-volt engine blocks of Chinese origin such as Zongshen, Lifan, Ducar, Loncin, and other replica engines. This complete base plate contains: Two coils (ignition coil + charging circuit) Pickup sensor Connection...- €24,90
- €24,90
- Unit price
- per
-
Support / taillight bracket for Dax matte black
- €29,00
- €29,00
- Unit price
- per
Taillight and License Plate Holder with Fender Support – Matte Black Metal holder with integrated taillight and license plate support, suitable for Honda Dax and various replicas. This part is designed with dimensions and mounting points that match the original model. High-quality taillight support...- €29,00
- €29,00
- Unit price
- per
-
Support / taillight bracket for dax silver - made of metal including bolts
- €29,00
- €29,00
- Unit price
- per
Taillight and License Plate Holder with Fender Support – silver Metal holder with integrated taillight and license plate support, suitable for Honda Dax and various replicas. This part is designed with dimensions and mounting points that match the original model. High quality taillight support...- €29,00
- €29,00
- Unit price
- per
-
Stickers Honda emblem logo S800 Chrome (repro) set of 2 pieces
- €13,50
- €13,50
- Unit price
- per
Honda emblem sticker set Two pieces per purchase as shown in the photos Available in various colors (silver, black, red, carbon, gold, and blue) Length of the stickers: 21 cm Suitable for all types and models of dax. (Honda, Skyteam, Bluroc, Zhenhua...) Color: Chrome...- €13,50
- €13,50
- Unit price
- per
-
Stickers Honda emblem S800 blue (repro) Set of 2 pieces
- €12,99
- €12,99
- Unit price
- per
Honda emblem sticker set Two pieces per purchase as shown in the photos Available in different colors (silver, black, red, carbon, gold, and blue) Length of the stickers: 21 cm Suitable for all types and models of Dax. (Honda, Skyteam, Bluroc, Zhenhua...) Color: Blue...- €12,99
- €12,99
- Unit price
- per
-
Stickers Honda emblem S800 Carbon (repro) Set of 2 pieces
- €13,99
- €13,99
- Unit price
- per
Honda emblem sticker set Two pieces per purchase as shown in the photos Available in different colors (silver, black, red, carbon, gold, and blue) Length of the stickers: 21 cm Suitable for all types and models of dax. (Honda, Skyteam, Bluroc, Zhenhua...) Color: Carbon...- €13,99
- €13,99
- Unit price
- per
-
Stickers Honda emblem S800 Black (repro) Set of 2 pieces
- €13,99
- €13,99
- Unit price
- per
Honda emblem sticker set Two pieces per purchase as shown in the photos Available in different colors (silver, black, red, carbon, gold, and blue) Length of the stickers: 21 cm Suitable for all types and models of dax. (Honda, Skyteam, Bluroc, Zhenhua...) Color: black...- €13,99
- €13,99
- Unit price
- per
- Choosing a selection results in a full page refresh.